Spray paint
Showing all 25 results
-
AGS 221 GEL
AGS 221 GEL is used for graffiti and paint removal from smooth factory-made/painted surfaces, e.g trains, coaches & buses, cars and industrial buildings etc. Can also be used on porous substrates. AGS 221 GEL is readily biodegradable.
-
AGS 1 is a powerful graffiti and paint remover. For use on exterior and interior surfaces. For use on hard, non-porous surfaces and painted surfaces. Readily biodegradable.
-
AGS 10
AGS 10 is a product used for the removal of pigment shadows left after graffiti removal. Always test AGS 10 on the material from which the shadows is to be removed to see that the surface is not affected negatively. Exercise particular caution when using AGS 10 on materials like marble and travertine. For use on exterior and interior surfaces. Primarily used on absorbent surfaces. Can be used when AGS 60 or AGS 65 is not quite strong enough. Biodegradable.
-
AGS 3505
AGS 3505 is used for removal of AGS 3500/AGS 3502/AGS 3503/AGS 3512 protective coatings and graffiti on delicate substrate. For use on exterior surfaces. For porous surfaces. Biodegradable.
-
AGS 3514
AGS 3514 is a water-carried all-weather long-term protection, formulated for most types of surfaces. Provides strong protection against spray paint, marker/felt-tip pens and mechanical damage. Protects against airborne pollution and moisture for a minimum of 5 years. Low melting point (60°C) and is suitable to apply on delicate surfaces such as: plaster, limestone, sandstone, etc. The low melting point makes the time spent on wash off significantly less. Permeable and allows protected surface to breathe. Correctly applied, life expectancy against graffiti is approximately 5 years. A so called sacrificial coating, which means that surface must be re-protected, following graffiti removal. Easily biodegradable.
-
AGS 3512
A water-carried all-weather long-term protection, formulated for most types of surfaces. Provides extra strong protection against spray paint, marker/felt-tip pens and mechanical damage. Protects against airborne pollution and moisture for a minimum of 5 years. Permeable and allows protected surface to breathe. Correctly applied, life expectancy against graffiti is approximately 5
years. Prevents graffiti from penetrating into substrate. A so called sacrificial coating, which means that surface must be re-protected, following graffiti removal. AGS 3512 is readily biodegradable. -
AGS 3506
AGS 3506 is a pigmented water based all-weather long-term protection, formulated for most types of surfaces. AGS 3506 can be pigmented according to NCS and RAL standards. Formulated for most types of surfaces. Protects against graffiti from spray paint or marker/felt-tip pen. Protects against graffiti, airborne pollution and moisture for a minimum of 5 years. Permeable and allows protected surface to breathe. Prevents graffiti from penetrating into substrate. A so called sacrificial coating, which means that surface must be re-protected, following graffiti removal.
AGS 3506 is readily biodegradable. -
AGS 3503
AGS 3503 is a slightly thickened water-carried wax-based protection to be used on absorbent surfaces. Provides strong protection against spray paint, marker/felt-tip pens and mechanical damage. Protects the treated surface against airborne pollution and moisture for a minimum of 5 years. Permeable and allows protected surface to breathe. Prevents graffiti from penetrating into substrate. A so called sacrificial coating, which means that surface must be re-protected following graffiti removal. AGS 3503 is readily biodegradable according to OECD Guideline 302B.
-
AGS 3502 ICE
A water-carried all-weather long-term protection, formulated for most types of surfaces. May be used below 0°C. Provides extra strong protection against spray paint, marker/felt-tip pens and mechanical damage. Protects against airborne pollution and moisture for a minimum of 7 years. Permeable and allows protected surface to breath. Correctly applied, life expectancy against graffiti
is approximately 7 years. Prevents graffiti from penetrating into substrate. A so-called sacrificial coating, which means that surface must be re-protected following graffiti removal. AGS 3502 ICE is readily biodegradable. -
AGS 3500
AGS 3500 is a water-carried all-weather long-term protection, formulated for most types of surfaces. Provides strong protection against spray paint, marker/felt-tip pens and mechanical damage. Protects against airborne pollution and moisture for a minimum of 5 years. Permeable and allows protected surface to breathe. Correctly applied, life expectancy against graffiti is approximately 5 years. Prevents graffiti from penetrating into substrate. A so called sacrificial coating, which means that surface must be re-protected, following graffiti removal. AGS 3500 is biodegradable.
-
AGS 3550
AGS 3550 is an outstanding 1-pack permanent protective coating. Contains of a polysilazane/nitrogen compound which gives a very hard bonding to the surface. Stops permanent markers and spray paint graffiti from penetrating the surface. AGS 3550 also withstands most of the leather dye graffiti in the market. AGS 3550 gives matt and dull surfaces a fresh and shiny lustre. AGS 3550 has an excellent durability and high UV resistance. Oxidation and corrosion resistance. High and low temperature resistance.
AGS 3550 may be applied on most hard surfaces such as painted metal, (buses, trains, ticket machines, mail boxes), aluminium, galvanised steel and most plastics and Perspex. If uncertainty of adhesion, make a small test with a strong tape and rip off.Note! AGS 3550 shall NOT be applied on exterior porous surfaces.
-
AGS 3515
AGS 3515 is a water-carried all-weather temporary graffiti protection, formulated for most types of absorbing surfaces. AGS 3515 is designed to be used as a 1 layer protection. Provides good protection against spray paint, marker/felt-tip pens and mechanical damage. Protects against airborne pollution and moisture. Low melting point (60°C) contributes to easy wash off. Permeable and allows protected surface to breathe. Easily biodegradable. A so called sacrificial coating, which means that surface must be re-protected, following graffiti removal. AGS 3515 is suitable on surfaces that are frequently vandalized with graffiti, for example pedestrian tunnels. On such surfaces, 1 thick layer is often enough. In these occasions, AGS 3515 works as a temporary protection with 1-2 years of durability.
Note! When applying AGS 3515, a white ”milky” appearance is obtained. which after drying becomes transparent. -
AGS 3502
AGS 3502 is a water-carried all-weather long-term protection, formulated for most types of surfaces. Provides extra strong protection against spray paint, marker/felt-tip pens and mechanical damage. Also provides protection against airborne pollution and moisture. Correctly applied, life expectancy against graffiti is approximately 7 years and can be increased up to 10 years. Permeable and allows protected surface to breath. Prevents graffiti from penetrating into substrate. A so called sacrificial coating, which means that surface must be re protected, following graffiti removal. AGS 3502 is readily biodegradable according to OECD test 302 B.
-
AGS 60
AGS 60 removes shadowing left in substrate following graffiti removal, in special cases also paint removal. AGS 60 is formulated for use on the following materials: granite, slate, sandstone, glazed brick, treated marble, wood and non-organic paint. Readily biodegradable according to OECD test 302 b. For use on exterior and interior surfaces. Primarily used on absorbent surfaces.
Note! Do not use AGS 60 on aluminium and copper. -
AGS HAWK WIPES
AGS HAWK WIPES contains a highly efficient graffiti remover absorbed into paper clothes. Efficiently removes spray paint and marker-/felt tip pen graffiti. AGS HAWK WIPES can be used on industrial painted and delicate surfaces. NOTE! Do not use AGS HAWK WIPES on Plexiglas. Use AGS PLEXI WIPES or AGS 560 instead. For use on exterior and interior surfaces. The solvent in the wipes is readily biodegradable and safe to use.
-
AGS 33+ GEL
AGS 33+ GEL is a thickened highly effective graffiti remover to be used on porous and some hard surfaces. Specially designed for use in cold weather conditions. AGS 33+ GEL dissolves spray-paint graffiti, permanent markers and even petroleum based rust protective sealers. AGS 33+ GEL may be used on following surfaces:
Porous surfaces:
Concrete, brick, granite, marble, limestone, sandstone, slate, surfaces painted with non-organic paint.
Hard surfaces:
Metal, treated wood, clinker, glazed brick and some plasters. -
AGS 560 PLEXI CLEAN
AGS 560 PLEXI CLEAN is especially developed for removal of graffiti on plexiglass. Effectively removes marker felt-tip pen, leather dye and rust protective coating without attacking the plexiglass. AGS 560 PLEXI CLEAN is also effective on other painted and delicate surfaces. AGS 560 PLEXI CLEAN even works on spray paint graffiti, but the dissolving time is a little bit longer.
NB! Testing on a small surface prior to removal is recommended.
-
AGS 560
AGS 560 is especially developed for removal of graffiti on plexiglass. Effectively removes marker felt-tip pen and rust protective coating without attacking the plexiglass. AGS 560 is also effective on other painted and delicate surfaces. AGS 560 even works on spray paint graffiti, but the dissolving time is a little bit longer. Testing on a small surface prior to removal is recommended. For outside and indoor use. Biodegradable.
-
AGS 3+ GEL
AGS 3+ GEL is a thickened highly effective graffiti remover to be used on both porous and hard surfaces. AGS 3+ GEL dissolves spray-paint graffiti, permanent markers and even petroleum based rust protective sealers. For use on exterior and interior surfaces. Readily biodegradable.
AGS 3+ GEL may be used on following surfaces:
Porous surfaces:
Concrete, brick, granite, marble, limestone, sandstone, slate, surfaces painted with non-organic paint.
Hard surfaces:
Metal, treated wood, clinker, glazed brick, glass. -
AGS 2+ GEL
AGS 2+ GEL is a powerful graffiti and paint remover. For use on exterior and interior surfaces. AGS 2+ GEL may be used on porous surfaces for all weather conditions. AGS 2+ GEL effectively dissolves spray paint graffiti and permanent markers. Readily biodegradable according to OECD test 302 B.
AGS 2+ GEL may be used on following surfaces:
Porous surfaces
Concrete, brick, granite, marble, limestone, sandstone, slate, surfaces painted with non-organic paint.Hard surfaces
Metal, treated wood, clinker, glazed brick, glass. -
AGS POWER BLUE LIQUID
AGS POWER BLUE LIQUID is a very powerful graffiti remover to be used on porous surfaces such as: granite, brick, concrete, lime, tiles, etc. AGS POWER BLUE LIQUID dissolves spray-paint graffiti, permanent markers and leather dye graffiti.
NB! Do not use AGS POWER BLUE LIQUID on metal surfaces as aluminium. Make a test before removal.
-
TAGS AWAY
TAGS AWAY effectively removes graffiti from most types of permanent marker or felt-tip pens. Can also be used on spray-paint. May be used on most surfaces; hard painted surfaces, porous surfaces, galvanized surfaces. TAGS AWAY has shown to be very effective to solve difficult leather dye pigments. For use on exterior and interior surfaces.
-
AGS 65
AGS 65 removes shadowing left in substrate following graffiti removal, in special cases also paint removal. AGS 65 is formulated for use on the following materials: granite, slate, sand-stone, glazed brick, treated marble, wood and non-organic paint. AGS 65 is slightly thickened to cling on surface and increase the dwelling time. Readily biodegradable. For use on exterior and interior surfaces. Primarily used on porous surfaces.
NOTE! AGS 65 must not be used on soft metal surfaces, aluminium, e.g.
-
AGS 221 LIQUID
AGS 221 LIQUID is a graffiti and paint remover. For use on exterior and interior surfaces. AGS 221 LIQUID is used mainly on: road signs, smooth factory made/painted surfaces and other delicate surfaces. Can also be used on porous substrates. AGS 221 LIQUID is readily biodegradable.
Note! AGS 221 LIQUID must not be used on plexiglas. Use AGS 560 instead.
-
AGS POWER BLUE GEL
AGS POWER BLUE GEL is a very powerful graffiti and shadow remover to be used in cold weather and on difficult graffiti. Can be used on porous surfaces such as: granite, brick, concrete, lime, tiles, etc. AGS POWER BLUE GEL dissolves spray-paint graffiti, permanent markers and leather dye graffiti. For use on porous exterior surfaces.
Note! Do not use AGS POWER BLUE GEL on metal surfaces as aluminium. Make a test before removal.