AGS 10

AGS 10 is a product used for the removal of pigment shadows left after graffiti removal. Always test AGS 10 on the material from which the shadows is to be removed to see that the surface is not affected negatively. Exercise particular caution when using AGS 10 on materials like marble and travertine. For use on exterior and interior surfaces. Primarily used on absorbent surfaces. Can be used when AGS 60 or AGS 65 is not quite strong enough. Biodegradable.

Download safety sheet

Download product sheet

SKU: 3633 Categories: , Tags: , ,

Description

Application instructions

Graffiti-shadow removal: Spray or brush AGS 10 on the “shadows”, allow it to act for approx. 2–5 minutes. Rinse with water. Repeat the procedure until the shadow areas are removed.

Dosage
Use as concentrate or dilute with water.

Consumption
0,2 – 0,5 litre/m².

Storage
In closed original container.

Shelf life
Approximately 24 months in unopened container.

Precautions
Use protective clothing, visor, glasses and gloves.

Marking
Danger

Causes severe skin burns and eye damage.

Classified as dangerous goods at road and sea transport.
UN 1805, PHOSPHORIC ACID, LIQUID
Class: 8 PG: III
For more information, see MSDS.

Additional information

Amount

5 liter

Related products

  • AGS 33+ GEL

    AGS 33+ GEL is a thickened highly effective graffiti remover to be used on porous and some hard surfaces. Specially designed for use in cold weather conditions. AGS 33+ GEL dissolves spray-paint graffiti, permanent markers and even petroleum based rust protective sealers. AGS 33+ GEL may be used on following surfaces:
    Porous surfaces:
    Concrete, brick, granite, marble, limestone, sandstone, slate, surfaces painted with non-organic paint.
    Hard surfaces:
    Metal, treated wood, clinker, glazed brick and some plasters.

    Download safety sheet

    Download product sheet

  • Placeholder

    AGS 3550

    AGS 3550 is an outstanding 1-pack permanent protective coating. Contains of a polysilazane/nitrogen compound which gives a very hard bonding to the surface. Stops permanent markers and spray paint graffiti from penetrating the surface. AGS 3550 also withstands most of the leather dye graffiti in the market. AGS 3550 gives matt and dull surfaces a fresh and shiny lustre. AGS 3550 has an excellent durability and high UV resistance. Oxidation and corrosion resistance. High and low temperature resistance.
    AGS 3550 may be applied on most hard surfaces such as painted metal, (buses, trains, ticket machines, mail boxes), aluminium, galvanised steel and most plastics and Perspex. If uncertainty of adhesion, make a small test with a strong tape and rip off.

    Note! AGS 3550 shall NOT be applied on exterior porous surfaces.

    Download safety sheet

    Download product sheet

  • AGS 3500

    AGS 3500 is a water-carried all-weather long-term protection, formulated for most types of surfaces. Provides strong protection against spray paint, marker/felt-tip pens and mechanical damage. Protects against airborne pollution and moisture for a minimum of 5 years. Permeable and allows protected surface to breathe. Correctly applied, life expectancy against graffiti is approximately 5 years. Prevents graffiti from penetrating into substrate. A so called sacrificial coating, which means that surface must be re-protected, following graffiti removal. AGS 3500 is biodegradable.

    Download safety sheet

    Download product sheet

  • TAGS AWAY

    TAGS AWAY effectively removes graffiti from most types of permanent marker or felt-tip pens. Can also be used on spray-paint. May be used on most surfaces; hard painted surfaces, porous surfaces, galvanized surfaces. TAGS AWAY has shown to be very effective to solve difficult leather dye pigments. For use on exterior and interior surfaces.

    Download safety sheet

    Download product sheet