AGS HAWK WIPES

AGS HAWK WIPES contains a highly efficient graffiti remover absorbed into paper clothes. Efficiently removes spray paint and marker-/felt tip pen graffiti. AGS HAWK WIPES can be used on industrial painted and delicate surfaces. NOTE! Do not use AGS HAWK WIPES on Plexiglas. Use AGS PLEXI WIPES or AGS 560 instead. For use on exterior and interior surfaces. The solvent in the wipes is readily biodegradable and safe to use.

Download safety sheet

Download product sheet

SKU: 3998 Category: Tags: , ,

Description

Application instructions

Tear off a piece of paper cloth and wipe off the graffiti. In case of lot of graffiti: Try always to use clean side of the cloth to avoid smearing. After graffiti removal, rinse with water.
NB! AGS HAWK WIPES may be used on most surfaces, but to be sure that the surface will not damage, do a test on a small area.

Storage
Store frost-free in closed original container.

Shelf life
Approximately 24 months in unopened container.

Precautions
Use protective gloves. Use protective goggles when there is a risk of eye contact.

Marking
Warning

Harmful if swallowed. Causes skin irritation. Causes serious eye irritation.

Not classified as dangerous goods according to ADR.
For more information, see MSDS.

Additional information

Amount

Related products

  • AGS 60

    AGS 60 removes shadowing left in substrate following graffiti removal, in special cases also paint removal. AGS 60 is formulated for use on the following materials: granite, slate, sandstone, glazed brick, treated marble, wood and non-organic paint. Readily biodegradable according to OECD test 302 b. For use on exterior and interior surfaces. Primarily used on absorbent surfaces.
    Note! Do not use AGS 60 on aluminium and copper.

    Download safety sheet

    Download product sheet

  • AGS POWER BLUE GEL

    AGS POWER BLUE GEL is a very powerful graffiti and shadow remover to be used in cold weather and on difficult graffiti. Can be used on porous surfaces such as: granite, brick, concrete, lime, tiles, etc. AGS POWER BLUE GEL dissolves spray-paint graffiti, permanent markers and leather dye graffiti. For use on porous exterior surfaces.

    Note! Do not use AGS POWER BLUE GEL on metal surfaces as aluminium. Make a test before removal.

    Download safety sheet

    Download product sheet

  • AGS 3506

    AGS 3506 is a pigmented water based all-weather long-term protection, formulated for most types of surfaces. AGS 3506 can be pigmented according to NCS and RAL standards. Formulated for most types of surfaces. Protects against graffiti from spray paint or marker/felt-tip pen. Protects against graffiti, airborne pollution and moisture for a minimum of 5 years. Permeable and allows protected surface to breathe. Prevents graffiti from penetrating into substrate. A so called sacrificial coating, which means that surface must be re-protected, following graffiti removal.
    AGS 3506 is readily biodegradable.

    Download safety sheet

    Download product sheet

  • AGS 3515

    AGS 3515 is a water-carried all-weather temporary graffiti protection, formulated for most types of absorbing surfaces. AGS 3515 is designed to be used as a 1 layer protection. Provides good protection against spray paint, marker/felt-tip pens and mechanical damage. Protects against airborne pollution and moisture. Low melting point (60°C) contributes to easy wash off. Permeable and allows protected surface to breathe. Easily biodegradable. A so called sacrificial coating, which means that surface must be re-protected, following graffiti removal. AGS 3515 is suitable on surfaces that are frequently vandalized with graffiti, for example pedestrian tunnels. On such surfaces, 1 thick layer is often enough. In these occasions, AGS 3515 works as a temporary protection with 1-2 years of durability.
    Note! When applying AGS 3515, a white ”milky” appearance is obtained. which after drying becomes transparent.

    Download safety sheet

    Download product sheet