AGS 221 GEL

AGS 221 GEL is used for graffiti and paint removal from smooth factory-made/painted surfaces, e.g trains, coaches & buses, cars and industrial buildings etc. Can also be used on porous substrates. AGS 221 GEL is readily biodegradable.

Download safety sheet

Download product sheet

Download test reports

Description

Application instructions

Graffiti-removal from smooth surfaces:
Apply a thick layer of AGS 221 GEL with a brush. Cover all graffiti and wait 3-5 minutes. Agitate the whole area with a brush. When the graffiti has dissolved, jet off with medium-pressure and preferably warm water. If required, repeat the process.

Graffiti-removal from porous surfaces
Apply AGS 221 GEL with airless sprayer or brush. Agitate the whole area with a brush. Leave area to dissolve all graffiti approximately ½ – 4 hours. Jet off with hot water and high pressure, (90°C, 150 bar/2175 PSI). Lance nozzle spread should be 15 – 25 degrees and water flow should be 15 to 20 ltrs/minute, (4-5 gal/minute).

Note! For metal surfaces do not use too much pressure, as the effect can be negative. Instead, wipe with a sponge or cloth and rinse with warm water.

Dosage
Use as concentrate.

Consumption
0,3 – 1,0 litre/m².

Storage
Store at room temperature in original closed container.

Shelf life
Approximately 24 months in unopened container.

Precautions
Gloves. Safety glasses in case of splashes.

Additional information

Amount

5 liter, 10 liter, 10 liter hink, 20 liter, 200 liter, 1000 liter

You may also like…