Description
Application instructions
Preparation
Clean off both graffiti and other contamination, such as traffic dirt, wax, oil and paint-residue etc. from substrate. Mask and protect windows in a suitable manner. Ideal temperature for external application should be between 10-35°C. Minimum temperature is +5°C. Relative humidity must not exceed 95%.
Note! Fresh concrete has to cure for at least 28 days before protection. Painted surfaces to be protected are allowed to cure for 1-4 weeks depending on colour type.
Protection
Shake or stir product well prior to use. AGS 3515 may be applied with an airless spray gun or a roller. The protection is applied in 1 layer until saturation. AGS 3515 can be applied to a damp, but not wet, surface. Runs and/or excessive application can easily be washed off with water, following completion of work.
Exterior graffiti removal
Remove graffiti with hot water and high-pressure (60-90°C & 90-150 bar/ 1300-2175 PSI), or adjust temperature and pressure to the surface. Re-protect cleaned area with 1 layer until saturation.
Dosage
Use in concentrated form.
Consumption
Varies depending upon type of surface material. Its porosity and capillary ability etc.
Guidelines:
- Concrete, brick or similar approx. 0,2 ltr/m².
- Sandstone, plaster or other soft absorbent surfaces approx. 0,3 ltr/m².
Drying-period
Depending on the weather, the drying time for AGS 3515 is approx. 4 hours. Note! This is a guideline and may vary from surface to surface.
Appearance on the surface
Whitish appearance when wet, transparent more or less invisible when dry. Some surfaces may obtain enhanced gloss and darker shade.
Storage
Store frost-free in closed original container.
Shelf life
Approximately 12 months in unopened container.
Precautions
Use protective clothing and gloves.
