AGS 560 PLEXI CLEAN

AGS 560 PLEXI CLEAN is especially developed for removal of graffiti on plexiglass. Effectively removes marker felt-tip pen, leather dye and rust protective coating without attacking the plexiglass. AGS 560 PLEXI CLEAN is also effective on other painted and delicate surfaces. AGS 560 PLEXI CLEAN even works on spray paint graffiti, but the dissolving time is a little bit longer.

NB! Testing on a small surface prior to removal is recommended.

Download safety sheet

Download product sheet

Category: Tags: , , ,

Description

INSTRUCTIONS FOR USE
Graffiti removal
Use AGS 560 PLEXI CLEAN on a clean cloth or absorbent paper and wipe off graffiti. Turn the cloth so that a clean part is always used. Avoid smears of dissolved graffiti and wipe off residues of AGS 560 PLEXI CLEAN. Rinse with water and dry with a clean cloth.
The dissolving process is easily interrupted with water.

Dosage
Use as concentrate.

Consumption
0,2 – 0,5 litre/m².

Storage
Store frost-free in closed original container.

Shelf life
Approximately 24 months in unopened container.

Precautions
Use protective gloves and glasses.

Additional information

Yta

Related products

  • AGS HAWK WIPES

    AGS HAWK WIPES contains a highly efficient graffiti remover absorbed into paper clothes. Efficiently removes spray paint and marker-/felt tip pen graffiti. AGS HAWK WIPES can be used on industrial painted and delicate surfaces. NOTE! Do not use AGS HAWK WIPES on Plexiglas. Use AGS PLEXI WIPES or AGS 560 instead. For use on exterior and interior surfaces. The solvent in the wipes is readily biodegradable and safe to use.

    Download safety sheet

    Download product sheet

  • AGS POWER BLUE LIQUID

    AGS POWER BLUE LIQUID is a very powerful graffiti remover to be used on porous surfaces such as: granite, brick, concrete, lime, tiles, etc. AGS POWER BLUE LIQUID dissolves spray-paint graffiti, permanent markers and leather dye graffiti.

    NB! Do not use AGS POWER BLUE LIQUID on metal surfaces as aluminium. Make a test before removal.

    Download safety sheet

    Download product sheet

  • FBM 7

    FBM 7 is an environmentally friendly industrial paint remover. FBM 7 contains components, which penetrate and deteriorates binders in different kinds of paints. FBM 7 has a documented capacity to dissolve multiple layers of paint. Powder coatings, Acrylic, 2-components lacquer, Epoxy, Urethane. FBM 7 is easily biodegradable and user friendly.

    Download safety sheet

    Download product sheet

  • AGS 3515

    AGS 3515 is a water-carried all-weather temporary graffiti protection, formulated for most types of absorbing surfaces. AGS 3515 is designed to be used as a 1 layer protection. Provides good protection against spray paint, marker/felt-tip pens and mechanical damage. Protects against airborne pollution and moisture. Low melting point (60°C) contributes to easy wash off. Permeable and allows protected surface to breathe. Easily biodegradable. A so called sacrificial coating, which means that surface must be re-protected, following graffiti removal. AGS 3515 is suitable on surfaces that are frequently vandalized with graffiti, for example pedestrian tunnels. On such surfaces, 1 thick layer is often enough. In these occasions, AGS 3515 works as a temporary protection with 1-2 years of durability.
    Note! When applying AGS 3515, a white ”milky” appearance is obtained. which after drying becomes transparent.

    Download safety sheet

    Download product sheet