AGS POWER BLUE GEL

AGS POWER BLUE GEL is a very powerful graffiti and shadow remover to be used in cold weather and on difficult graffiti. Can be used on porous surfaces such as: granite, brick, concrete, lime, tiles, etc. AGS POWER BLUE GEL dissolves spray-paint graffiti, permanent markers and leather dye graffiti. For use on porous exterior surfaces.

Note! Do not use AGS POWER BLUE GEL on metal surfaces as aluminium. Make a test before removal.

Download safety sheet

Download product sheet

SKU: 3801 Categories: , Tags: ,

Description

Application instructions

Apply AGS POWER BLUE GEL with a brush. Agitate the surface well. Leave until graffiti has dissolved, 10-30 minutes depending on the surface, graffiti and weather conditions. Jet off with hot water and high pressure, 90°C, 150 bar/2175 PSI or adjust to the surface. Lance nozzle spread should be 15 – 25 degrees and water flow should be 15 to 20 litres/minute, (4-5 gal/minute). In case of shadows, apply AGS POWER BLUE GEL as a shadow remover, wait for 5-10 minutes before jet off with high pressure. Final rinsing with low pressure.

Dosage
Use as concentrate.

Consumption
0,5 – 1,0 litre/m².

Storage
Store frost-free in original closed container.

Shelf life
Approximately 24 months in unopened container.

Precautions
AGS POWER BLUE GEL is CORROSIVE, wear suitable protective clothing, gloves and eye/face protection. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

Additional information

Amount

, , ,

Related products

  • AGS 3503

    AGS 3503 is a slightly thickened water-carried wax-based protection to be used on absorbent surfaces. Provides strong protection against spray paint, marker/felt-tip pens and mechanical damage. Protects the treated surface against airborne pollution and moisture for a minimum of 5 years. Permeable and allows protected surface to breathe. Prevents graffiti from penetrating into substrate. A so called sacrificial coating, which means that surface must be re-protected following graffiti removal. AGS 3503 is readily biodegradable according to OECD Guideline 302B.

    Download safety sheet

    Download product sheet

  • AGS 10

    AGS 10 is a product used for the removal of pigment shadows left after graffiti removal. Always test AGS 10 on the material from which the shadows is to be removed to see that the surface is not affected negatively. Exercise particular caution when using AGS 10 on materials like marble and travertine. For use on exterior and interior surfaces. Primarily used on absorbent surfaces. Can be used when AGS 60 or AGS 65 is not quite strong enough. Biodegradable.

    Download safety sheet

    Download product sheet

  • AGS 65

    AGS 65 removes shadowing left in substrate following graffiti removal, in special cases also paint removal. AGS 65 is formulated for use on the following materials: granite, slate, sand-stone, glazed brick, treated marble, wood and non-organic paint. AGS 65 is slightly thickened to cling on surface and increase the dwelling time. Readily biodegradable. For use on exterior and interior surfaces. Primarily used on porous surfaces.

    NOTE! AGS 65 must not be used on soft metal surfaces, aluminium, e.g.

    Download safety sheet

    Download product sheet

  • AGS 3502

    AGS 3502 is a water-carried all-weather long-term protection, formulated for most types of surfaces. Provides extra strong protection against spray paint, marker/felt-tip pens and mechanical damage. Also provides protection against airborne pollution and moisture. Correctly applied, life expectancy against graffiti is approximately 7 years and can be increased up to 10 years. Permeable and allows protected surface to breath. Prevents graffiti from penetrating into substrate. A so called sacrificial coating, which means that surface must be re protected, following graffiti removal. AGS 3502 is readily biodegradable according to OECD test 302 B.

    Download safety sheet

    Download product sheet