AGS 560

AGS 560 is especially developed for removal of graffiti on plexiglass. Effectively removes marker felt-tip pen and rust protective coating without attacking the plexiglass. AGS 560 is also effective on other painted and delicate surfaces. AGS 560 even works on spray paint graffiti, but the dissolving time is a little bit longer. Testing on a small surface prior to removal is recommended. For outside and indoor use. Biodegradable.

Download safety sheet

Download product sheet

SKU: 3653 Category: Tags: , , ,

Description

Application instructions

Use AGS 560 on a clean cloth or absorbent paper and wipe off graffiti. Turn the cloth so that the clean part is always used. Avoid smears of dissolved graffiti and wipe off residues of AGS 560. Rinse with water and dry with a clean cloth. The dissolving process is easily interrupted with water.

Dosage
Use as concentrate.

Consumption
0,2 – 0,5 litre/m².

Storage
Store frost-free in closed original container.

Shelf life
Approximately 24 months in unopened container.

Precautions
Safety gloves, safety glasses in case of splashes.

Additional information

Amount

, , , ,

Related products

  • AGS 2+ GEL

    AGS 2+ GEL is a powerful graffiti and paint remover. For use on exterior and interior surfaces. AGS 2+ GEL may be used on porous surfaces for all weather conditions. AGS 2+ GEL effectively dissolves spray paint graffiti and permanent markers. Readily biodegradable according to OECD test 302 B.

    AGS 2+ GEL may be used on following surfaces:
    Porous surfaces
    Concrete, brick, granite, marble, limestone, sandstone, slate, surfaces painted with non-organic paint.

    Hard surfaces
    Metal, treated wood, clinker, glazed brick, glass.

    Download safety sheet

    Download product sheet

  • AGS 3+ GEL

    AGS 3+ GEL is a thickened highly effective graffiti remover to be used on both porous and hard surfaces. AGS 3+ GEL dissolves spray-paint graffiti, permanent markers and even petroleum based rust protective sealers. For use on exterior and interior surfaces. Readily biodegradable.

    AGS 3+ GEL may be used on following surfaces:
    Porous surfaces:
    Concrete, brick, granite, marble, limestone, sandstone, slate, surfaces painted with non-organic paint.
    Hard surfaces:
    Metal, treated wood, clinker, glazed brick, glass.

    Download safety sheet

    Download product sheet

  • Placeholder

    AGS 3550

    AGS 3550 is an outstanding 1-pack permanent protective coating. Contains of a polysilazane/nitrogen compound which gives a very hard bonding to the surface. Stops permanent markers and spray paint graffiti from penetrating the surface. AGS 3550 also withstands most of the leather dye graffiti in the market. AGS 3550 gives matt and dull surfaces a fresh and shiny lustre. AGS 3550 has an excellent durability and high UV resistance. Oxidation and corrosion resistance. High and low temperature resistance.
    AGS 3550 may be applied on most hard surfaces such as painted metal, (buses, trains, ticket machines, mail boxes), aluminium, galvanised steel and most plastics and Perspex. If uncertainty of adhesion, make a small test with a strong tape and rip off.

    Note! AGS 3550 shall NOT be applied on exterior porous surfaces.

    Download safety sheet

    Download product sheet

  • TAGS AWAY

    TAGS AWAY effectively removes graffiti from most types of permanent marker or felt-tip pens. Can also be used on spray-paint. May be used on most surfaces; hard painted surfaces, porous surfaces, galvanized surfaces. TAGS AWAY has shown to be very effective to solve difficult leather dye pigments. For use on exterior and interior surfaces.

    Download safety sheet

    Download product sheet