Description
Application instructions
Preparation
Clean off both graffiti and other contamination, such as traffic dirt, wax, oil and paint-residue etc. from the surface. Mask and protect windows in a suitable manner. Ideal temperature for external application should be between 10-35°C. Minimum temperature is +5°C. Relative humidity must not exceed 95%. Note! Fresh concrete has to cure for at least 28 days before protection.
Exterior protection
Shake or stir product well prior to use. Apply AGS 3503 with an airless sprayer. The protection is applied 2-3 times. Note! Allow some drying between applications. AGS 3503 can be applied to a damp, not wet, surface. Runs and/or excessive application can easily be washed off with water, following completion of work.
Exterior graffiti removal
Method 1 – Normal surfaces
Remove graffiti with hot water and high-pressure (90°C & 90-150 bar / 1300-2175 PSI). In difficult cases, AGS graffiti removers are used in conventional manner. Re-protect cleaned area.
Method 2 – Delicate surfaces
Apply AGS 3505 with a low-pressure sprayer. Allow a few minutes for the solvent remover to act and then rinse off with hot water (60-90°C & 60-80 bar/870-1160 PSI). The method is most suitable when substrate is brittle. Any graffiti left on the surface can be removed with AGS 3505 on a cloth. The cleaned area should be wiped with a cloth and water. Re-protect cleaned area.
Re-protection of cleaned surfaces
When removing graffiti, the protective coating is also normally removed. Re-protect 2-3 times with AGS 3503.
Dosage
Use in concentrated form.
Consumption
Varies depending upon type of surface material. Its porosity and capillary ability etc.
Guidelines
- Concrete, brick or similar, a total for 3 layers will be 0,25-0,3 ltr/m².
- Sandstone, plaster or other soft absorbent surfaces, a total for 3-4 layers will be 0,3-0,4 ltr/m².
Drying-period
The protected surface will be water- and graffiti-resistant after 2 hours and dry after 4 hours. Ultimate protective effect will be achieved after 72 hours.
Appearance on surface
Transparent, mostly invisible dependent on type of surface. UV- resistant. Weather-, water-, and graffiti – resistant. Note! Some building materials can darken or become shiny. In humid conditions the protective layer can become whitish, on hard glossy surfaces the adhesion of the protective layer can be affected.
Storage
Store frost-free in closed original container.
Shelf life
Approximately 12 months in unopened container.
Precautions
Use protective clothing and gloves.
