Description
Application instructions
Apply AGS 65 by brush on wet surface, leave to dwell for 5 – 30 minutes until graffiti/shadowing has dissolved. Jet off with high-pressure hot water, (40-90°C, 70-150 bar/1015-2175 PSI). Adjust pressure to suit surface condition.
Note! For metal surfaces, the effectiveness can be reduced if too high pressure is used. A better result can be achieved if the surface is wiped with a sponge or cloth in the rinsing process. Repeat the procedure if required.
Dosage
Use concentrate.
Consumption
0,2 – 0,5 litre/m² per application using concentrate.
Storage
Store frost-free in closed original container.
Shelf life
Approximately 24 months in unopened container.
Precautions
Special caution must be taken, as AGS 65 is a CORROSIVE product. Use protective clothing, visor, glasses and gloves. If product comes in contact with eyes, rinse with lot of water and immediately go to hospital. If skin contact, rinse with lots of water, to hospital if necessary.
