Marker/aniline graffiti
Showing all 26 results
-
AGS 221 GEL
AGS 221 GEL is used for graffiti and paint removal from smooth factory-made/painted surfaces, e.g trains, coaches & buses, cars and industrial buildings etc. Can also be used on porous substrates. AGS 221 GEL is readily biodegradable.
-
AGS 10
AGS 10 is a product used for the removal of pigment shadows left after graffiti removal. Always test AGS 10 on the material from which the shadows is to be removed to see that the surface is not affected negatively. Exercise particular caution when using AGS 10 on materials like marble and travertine. For use on exterior and interior surfaces. Primarily used on absorbent surfaces. Can be used when AGS 60 or AGS 65 is not quite strong enough. Biodegradable.
-
AGS 3505
AGS 3505 is used for removal of AGS 3500/AGS 3502/AGS 3503/AGS 3512 protective coatings and graffiti on delicate substrate. For use on exterior surfaces. For porous surfaces. Biodegradable.
-
AGS 3514
AGS 3514 is a water-carried all-weather long-term protection, formulated for most types of surfaces. Provides strong protection against spray paint, marker/felt-tip pens and mechanical damage. Protects against airborne pollution and moisture for a minimum of 5 years. Low melting point (60°C) and is suitable to apply on delicate surfaces such as: plaster, limestone, sandstone, etc. The low melting point makes the time spent on wash off significantly less. Permeable and allows protected surface to breathe. Correctly applied, life expectancy against graffiti is approximately 5 years. A so called sacrificial coating, which means that surface must be re-protected, following graffiti removal. Easily biodegradable.
-
AGS 3512
A water-carried all-weather long-term protection, formulated for most types of surfaces. Provides extra strong protection against spray paint, marker/felt-tip pens and mechanical damage. Protects against airborne pollution and moisture for a minimum of 5 years. Permeable and allows protected surface to breathe. Correctly applied, life expectancy against graffiti is approximately 5
years. Prevents graffiti from penetrating into substrate. A so called sacrificial coating, which means that surface must be re-protected, following graffiti removal. AGS 3512 is readily biodegradable. -
AGS 3506
AGS 3506 is a pigmented water based all-weather long-term protection, formulated for most types of surfaces. AGS 3506 can be pigmented according to NCS and RAL standards. Formulated for most types of surfaces. Protects against graffiti from spray paint or marker/felt-tip pen. Protects against graffiti, airborne pollution and moisture for a minimum of 5 years. Permeable and allows protected surface to breathe. Prevents graffiti from penetrating into substrate. A so called sacrificial coating, which means that surface must be re-protected, following graffiti removal.
AGS 3506 is readily biodegradable. -
AGS 3503
AGS 3503 is a slightly thickened water-carried wax-based protection to be used on absorbent surfaces. Provides strong protection against spray paint, marker/felt-tip pens and mechanical damage. Protects the treated surface against airborne pollution and moisture for a minimum of 5 years. Permeable and allows protected surface to breathe. Prevents graffiti from penetrating into substrate. A so called sacrificial coating, which means that surface must be re-protected following graffiti removal. AGS 3503 is readily biodegradable according to OECD Guideline 302B.
-
AGS 3502 ICE
A water-carried all-weather long-term protection, formulated for most types of surfaces. May be used below 0°C. Provides extra strong protection against spray paint, marker/felt-tip pens and mechanical damage. Protects against airborne pollution and moisture for a minimum of 7 years. Permeable and allows protected surface to breath. Correctly applied, life expectancy against graffiti
is approximately 7 years. Prevents graffiti from penetrating into substrate. A so-called sacrificial coating, which means that surface must be re-protected following graffiti removal. AGS 3502 ICE is readily biodegradable. -
AGS 3500
AGS 3500 is a water-carried all-weather long-term protection, formulated for most types of surfaces. Provides strong protection against spray paint, marker/felt-tip pens and mechanical damage. Protects against airborne pollution and moisture for a minimum of 5 years. Permeable and allows protected surface to breathe. Correctly applied, life expectancy against graffiti is approximately 5 years. Prevents graffiti from penetrating into substrate. A so called sacrificial coating, which means that surface must be re-protected, following graffiti removal. AGS 3500 is biodegradable.
-
AGS 3550
AGS 3550 is an outstanding 1-pack permanent protective coating. Contains of a polysilazane/nitrogen compound which gives a very hard bonding to the surface. Stops permanent markers and spray paint graffiti from penetrating the surface. AGS 3550 also withstands most of the leather dye graffiti in the market. AGS 3550 gives matt and dull surfaces a fresh and shiny lustre. AGS 3550 has an excellent durability and high UV resistance. Oxidation and corrosion resistance. High and low temperature resistance.
AGS 3550 may be applied on most hard surfaces such as painted metal, (buses, trains, ticket machines, mail boxes), aluminium, galvanised steel and most plastics and Perspex. If uncertainty of adhesion, make a small test with a strong tape and rip off.Note! AGS 3550 shall NOT be applied on exterior porous surfaces.
-
AGS 3515
AGS 3515 is a water-carried all-weather temporary graffiti protection, formulated for most types of absorbing surfaces. AGS 3515 is designed to be used as a 1 layer protection. Provides good protection against spray paint, marker/felt-tip pens and mechanical damage. Protects against airborne pollution and moisture. Low melting point (60°C) contributes to easy wash off. Permeable and allows protected surface to breathe. Easily biodegradable. A so called sacrificial coating, which means that surface must be re-protected, following graffiti removal. AGS 3515 is suitable on surfaces that are frequently vandalized with graffiti, for example pedestrian tunnels. On such surfaces, 1 thick layer is often enough. In these occasions, AGS 3515 works as a temporary protection with 1-2 years of durability.
Note! When applying AGS 3515, a white ”milky” appearance is obtained. which after drying becomes transparent. -
AGS 3502
AGS 3502 is a water-carried all-weather long-term protection, formulated for most types of surfaces. Provides extra strong protection against spray paint, marker/felt-tip pens and mechanical damage. Also provides protection against airborne pollution and moisture. Correctly applied, life expectancy against graffiti is approximately 7 years and can be increased up to 10 years. Permeable and allows protected surface to breath. Prevents graffiti from penetrating into substrate. A so called sacrificial coating, which means that surface must be re protected, following graffiti removal. AGS 3502 is readily biodegradable according to OECD test 302 B.
-
AGS GRAFFITI WIPES
AGS GRAFFITI WIPES contain a highly efficient graffiti remover absorbed into paper cloth. AGS GRAFFITI WIPES are used for most types of spray paint and marker-/felt-tip pen graffiti removal. For use on exterior and interior surfaces. AGS GRAFFITI WIPES are used on painted and other delicate surfaces. The solvent in the wipes is readily biodegradable and safe to use. Do not use AGS GRAFFITI WIPES on plexiglas. Use AGS PLEXI WIPES or AGS 560 instead.
-
AGS 5 SR
AGS 5 SR is a specially developed graffiti remover for removal of shadowing from most types of permanent markers or felt-tip pen graffiti and leather dyes. Can also be used on spray-paint. AGS 5 SR may be used on most surfaces. Hard non-porous surfaces, such as painted substrates. Porous surfaces, such as concrete, brick, sandstone, limestone, etc. AGS 5 SR has shown to be very effective to solve difficult leather dye pigments. For use on exterior and interior surfaces.
-
AGS 5 SR HAWK GEL
AGS 5 SR HAWK GEL a specially developed graffiti remover for removal of shadowing from most types of permanent markers or felt-tip pen graffiti and leather dyes. For use on exterior and interior surfaces. AGS 5 SR HAWK GEL may be used on most surfaces: hard non porous surfaces, such as painted substrates, porous surfaces, such as brick, concrete, sandstone, limestone etc.
-
AGS 5 SR HAWK
AGS 5 SR HAWK effectively removes graffiti and shadowing from most types of permanent marker or felt-tip pens. Can also be used on spray-paint. AGS 5 SR HAWK may be used on most surfaces. Hard non-porous surfaces, such as painted substrates. AGS 5 SR HAWK has shown to be very effective to solve difficult leather dye pigments. For use on exterior and interior surfaces.
-
AGS PLEXI WIPES
AGS PLEXI WIPES contain a highly efficient graffiti remover absorbed into paper cloths. AGS PLEXI WIPES efficiently remove marker-/felt tip pen graffiti, rust protective sealers and spray paint. Note! On cured spray paint, AGS PLEXI WIPES need longer working time. AGS PLEXI WIPES are specially developed for graffiti removal on different types of plexiglas’s. The solvents in the wipes are biodegradable and safe to use.
-
AGS 60
AGS 60 removes shadowing left in substrate following graffiti removal, in special cases also paint removal. AGS 60 is formulated for use on the following materials: granite, slate, sandstone, glazed brick, treated marble, wood and non-organic paint. Readily biodegradable according to OECD test 302 b. For use on exterior and interior surfaces. Primarily used on absorbent surfaces.
Note! Do not use AGS 60 on aluminium and copper. -
AGS HAWK WIPES
AGS HAWK WIPES contains a highly efficient graffiti remover absorbed into paper clothes. Efficiently removes spray paint and marker-/felt tip pen graffiti. AGS HAWK WIPES can be used on industrial painted and delicate surfaces. NOTE! Do not use AGS HAWK WIPES on Plexiglas. Use AGS PLEXI WIPES or AGS 560 instead. For use on exterior and interior surfaces. The solvent in the wipes is readily biodegradable and safe to use.
-
AGS 560 PLEXI CLEAN
AGS 560 PLEXI CLEAN is especially developed for removal of graffiti on plexiglass. Effectively removes marker felt-tip pen, leather dye and rust protective coating without attacking the plexiglass. AGS 560 PLEXI CLEAN is also effective on other painted and delicate surfaces. AGS 560 PLEXI CLEAN even works on spray paint graffiti, but the dissolving time is a little bit longer.
NB! Testing on a small surface prior to removal is recommended.
-
AGS 560
AGS 560 is especially developed for removal of graffiti on plexiglass. Effectively removes marker felt-tip pen and rust protective coating without attacking the plexiglass. AGS 560 is also effective on other painted and delicate surfaces. AGS 560 even works on spray paint graffiti, but the dissolving time is a little bit longer. Testing on a small surface prior to removal is recommended. For outside and indoor use. Biodegradable.
-
AGS POWER BLUE LIQUID
AGS POWER BLUE LIQUID is a very powerful graffiti remover to be used on porous surfaces such as: granite, brick, concrete, lime, tiles, etc. AGS POWER BLUE LIQUID dissolves spray-paint graffiti, permanent markers and leather dye graffiti.
NB! Do not use AGS POWER BLUE LIQUID on metal surfaces as aluminium. Make a test before removal.
-
TAGS AWAY
TAGS AWAY effectively removes graffiti from most types of permanent marker or felt-tip pens. Can also be used on spray-paint. May be used on most surfaces; hard painted surfaces, porous surfaces, galvanized surfaces. TAGS AWAY has shown to be very effective to solve difficult leather dye pigments. For use on exterior and interior surfaces.
-
AGS 65
AGS 65 removes shadowing left in substrate following graffiti removal, in special cases also paint removal. AGS 65 is formulated for use on the following materials: granite, slate, sand-stone, glazed brick, treated marble, wood and non-organic paint. AGS 65 is slightly thickened to cling on surface and increase the dwelling time. Readily biodegradable. For use on exterior and interior surfaces. Primarily used on porous surfaces.
NOTE! AGS 65 must not be used on soft metal surfaces, aluminium, e.g.
-
AGS 221 LIQUID
AGS 221 LIQUID is a graffiti and paint remover. For use on exterior and interior surfaces. AGS 221 LIQUID is used mainly on: road signs, smooth factory made/painted surfaces and other delicate surfaces. Can also be used on porous substrates. AGS 221 LIQUID is readily biodegradable.
Note! AGS 221 LIQUID must not be used on plexiglas. Use AGS 560 instead.
-
AGS 5 SR GEL
AGS 5 SR GEL är speciellt framtagen för borttagning av klotter och skuggbildning från ex. tusch- och anilinfärger på hårda ytor. Löser även effektivt sprayklotter på porösa ytor. Används både inom- och utomhus.