AGS PLEXI WIPES

AGS PLEXI WIPES contain a highly efficient graffiti remover absorbed into paper cloths. AGS PLEXI WIPES efficiently remove marker-/felt tip pen graffiti, rust protective sealers and spray paint. Note! On cured spray paint, AGS PLEXI WIPES need longer working time. AGS PLEXI WIPES are specially developed for graffiti removal on different types of plexiglas’s. The solvents in the wipes are biodegradable and safe to use.

Download safety sheet

Download product sheet

SKU: 3997 Category: Tags: ,

Description

Application instructions

Tear off a piece of paper cloth and wipe off the graffiti. Try always to use clean side of the cloth to avoid smearing. After removal, rinse with water.
Note! AGS PLEXI WIPES may be used on most surfaces, but to be sure that the surface will not damage, make always a test.

Storage
Store frost-free in closed original container.

Shelf life
Approximately 24 months in unopened container.

Precautions
Use protective gloves.

Marking
Warning

Causes serious eye irritation.

Not classified as dangerous goods according to ADR.
For more information, see MSDS.

Additional information

Förpackningsstorlek

Related products

  • AGS 5 SR HAWK GEL

    AGS 5 SR HAWK GEL a specially developed graffiti remover for removal of shadowing from most types of permanent markers or felt-tip pen graffiti and leather dyes. For use on exterior and interior surfaces. AGS 5 SR HAWK GEL may be used on most surfaces: hard non porous surfaces, such as painted substrates, porous surfaces, such as brick, concrete, sandstone, limestone etc.

    Download safety sheet

    Download product sheet

  • AGS 65

    AGS 65 removes shadowing left in substrate following graffiti removal, in special cases also paint removal. AGS 65 is formulated for use on the following materials: granite, slate, sand-stone, glazed brick, treated marble, wood and non-organic paint. AGS 65 is slightly thickened to cling on surface and increase the dwelling time. Readily biodegradable. For use on exterior and interior surfaces. Primarily used on porous surfaces.

    NOTE! AGS 65 must not be used on soft metal surfaces, aluminium, e.g.

    Download safety sheet

    Download product sheet

  • Placeholder

    AGS 3550

    AGS 3550 is an outstanding 1-pack permanent protective coating. Contains of a polysilazane/nitrogen compound which gives a very hard bonding to the surface. Stops permanent markers and spray paint graffiti from penetrating the surface. AGS 3550 also withstands most of the leather dye graffiti in the market. AGS 3550 gives matt and dull surfaces a fresh and shiny lustre. AGS 3550 has an excellent durability and high UV resistance. Oxidation and corrosion resistance. High and low temperature resistance.
    AGS 3550 may be applied on most hard surfaces such as painted metal, (buses, trains, ticket machines, mail boxes), aluminium, galvanised steel and most plastics and Perspex. If uncertainty of adhesion, make a small test with a strong tape and rip off.

    Note! AGS 3550 shall NOT be applied on exterior porous surfaces.

    Download safety sheet

    Download product sheet

  • AGS 221 GEL

    AGS 221 GEL is used for graffiti and paint removal from smooth factory-made/painted surfaces, e.g trains, coaches & buses, cars and industrial buildings etc. Can also be used on porous substrates. AGS 221 GEL is readily biodegradable.

    Download safety sheet

    Download product sheet

    Download test reports