Rust protection paste
Showing all 16 results
-
AGS 3505
AGS 3505 is used for removal of AGS 3500/AGS 3502/AGS 3503/AGS 3512 protective coatings and graffiti on delicate substrate. For use on exterior surfaces. For porous surfaces. Biodegradable.
-
AGS 3514
AGS 3514 is a water-carried all-weather long-term protection, formulated for most types of surfaces. Provides strong protection against spray paint, marker/felt-tip pens and mechanical damage. Protects against airborne pollution and moisture for a minimum of 5 years. Low melting point (60°C) and is suitable to apply on delicate surfaces such as: plaster, limestone, sandstone, etc. The low melting point makes the time spent on wash off significantly less. Permeable and allows protected surface to breathe. Correctly applied, life expectancy against graffiti is approximately 5 years. A so called sacrificial coating, which means that surface must be re-protected, following graffiti removal. Easily biodegradable.
-
AGS 3512
A water-carried all-weather long-term protection, formulated for most types of surfaces. Provides extra strong protection against spray paint, marker/felt-tip pens and mechanical damage. Protects against airborne pollution and moisture for a minimum of 5 years. Permeable and allows protected surface to breathe. Correctly applied, life expectancy against graffiti is approximately 5
years. Prevents graffiti from penetrating into substrate. A so called sacrificial coating, which means that surface must be re-protected, following graffiti removal. AGS 3512 is readily biodegradable. -
AGS 3506
AGS 3506 is a pigmented water based all-weather long-term protection, formulated for most types of surfaces. AGS 3506 can be pigmented according to NCS and RAL standards. Formulated for most types of surfaces. Protects against graffiti from spray paint or marker/felt-tip pen. Protects against graffiti, airborne pollution and moisture for a minimum of 5 years. Permeable and allows protected surface to breathe. Prevents graffiti from penetrating into substrate. A so called sacrificial coating, which means that surface must be re-protected, following graffiti removal.
AGS 3506 is readily biodegradable. -
AGS 3503
AGS 3503 is a slightly thickened water-carried wax-based protection to be used on absorbent surfaces. Provides strong protection against spray paint, marker/felt-tip pens and mechanical damage. Protects the treated surface against airborne pollution and moisture for a minimum of 5 years. Permeable and allows protected surface to breathe. Prevents graffiti from penetrating into substrate. A so called sacrificial coating, which means that surface must be re-protected following graffiti removal. AGS 3503 is readily biodegradable according to OECD Guideline 302B.
-
AGS 3502 ICE
A water-carried all-weather long-term protection, formulated for most types of surfaces. May be used below 0°C. Provides extra strong protection against spray paint, marker/felt-tip pens and mechanical damage. Protects against airborne pollution and moisture for a minimum of 7 years. Permeable and allows protected surface to breath. Correctly applied, life expectancy against graffiti
is approximately 7 years. Prevents graffiti from penetrating into substrate. A so-called sacrificial coating, which means that surface must be re-protected following graffiti removal. AGS 3502 ICE is readily biodegradable. -
AGS 3500
AGS 3500 is a water-carried all-weather long-term protection, formulated for most types of surfaces. Provides strong protection against spray paint, marker/felt-tip pens and mechanical damage. Protects against airborne pollution and moisture for a minimum of 5 years. Permeable and allows protected surface to breathe. Correctly applied, life expectancy against graffiti is approximately 5 years. Prevents graffiti from penetrating into substrate. A so called sacrificial coating, which means that surface must be re-protected, following graffiti removal. AGS 3500 is biodegradable.
-
AGS 3550
AGS 3550 is an outstanding 1-pack permanent protective coating. Contains of a polysilazane/nitrogen compound which gives a very hard bonding to the surface. Stops permanent markers and spray paint graffiti from penetrating the surface. AGS 3550 also withstands most of the leather dye graffiti in the market. AGS 3550 gives matt and dull surfaces a fresh and shiny lustre. AGS 3550 has an excellent durability and high UV resistance. Oxidation and corrosion resistance. High and low temperature resistance.
AGS 3550 may be applied on most hard surfaces such as painted metal, (buses, trains, ticket machines, mail boxes), aluminium, galvanised steel and most plastics and Perspex. If uncertainty of adhesion, make a small test with a strong tape and rip off.Note! AGS 3550 shall NOT be applied on exterior porous surfaces.
-
AGS 3515
AGS 3515 is a water-carried all-weather temporary graffiti protection, formulated for most types of absorbing surfaces. AGS 3515 is designed to be used as a 1 layer protection. Provides good protection against spray paint, marker/felt-tip pens and mechanical damage. Protects against airborne pollution and moisture. Low melting point (60°C) contributes to easy wash off. Permeable and allows protected surface to breathe. Easily biodegradable. A so called sacrificial coating, which means that surface must be re-protected, following graffiti removal. AGS 3515 is suitable on surfaces that are frequently vandalized with graffiti, for example pedestrian tunnels. On such surfaces, 1 thick layer is often enough. In these occasions, AGS 3515 works as a temporary protection with 1-2 years of durability.
Note! When applying AGS 3515, a white ”milky” appearance is obtained. which after drying becomes transparent. -
AGS 3502
AGS 3502 is a water-carried all-weather long-term protection, formulated for most types of surfaces. Provides extra strong protection against spray paint, marker/felt-tip pens and mechanical damage. Also provides protection against airborne pollution and moisture. Correctly applied, life expectancy against graffiti is approximately 7 years and can be increased up to 10 years. Permeable and allows protected surface to breath. Prevents graffiti from penetrating into substrate. A so called sacrificial coating, which means that surface must be re protected, following graffiti removal. AGS 3502 is readily biodegradable according to OECD test 302 B.
-
AGS PLEXI WIPES
AGS PLEXI WIPES contain a highly efficient graffiti remover absorbed into paper cloths. AGS PLEXI WIPES efficiently remove marker-/felt tip pen graffiti, rust protective sealers and spray paint. Note! On cured spray paint, AGS PLEXI WIPES need longer working time. AGS PLEXI WIPES are specially developed for graffiti removal on different types of plexiglas’s. The solvents in the wipes are biodegradable and safe to use.
-
AGS 27 GEL
AGS 27 GEL is a readily biodegradable product used for removal of rust protective sealers. AGS 27 GEL may be used on most surfaces: hard non-porous surfaces, such as polished stone surfaces, plastic, metal, or porous surfaces such as concrete, brick, granite, plaster etc. For use on exterior and interior surfaces. On porous surfaces: Use AGS 27 GEL in combination with AGS 25. Readily biodegradable.
-
AGS 560 PLEXI CLEAN
AGS 560 PLEXI CLEAN is especially developed for removal of graffiti on plexiglass. Effectively removes marker felt-tip pen, leather dye and rust protective coating without attacking the plexiglass. AGS 560 PLEXI CLEAN is also effective on other painted and delicate surfaces. AGS 560 PLEXI CLEAN even works on spray paint graffiti, but the dissolving time is a little bit longer.
NB! Testing on a small surface prior to removal is recommended.
-
AGS 560
AGS 560 is especially developed for removal of graffiti on plexiglass. Effectively removes marker felt-tip pen and rust protective coating without attacking the plexiglass. AGS 560 is also effective on other painted and delicate surfaces. AGS 560 even works on spray paint graffiti, but the dissolving time is a little bit longer. Testing on a small surface prior to removal is recommended. For outside and indoor use. Biodegradable.
-
AGS TECTYLBORT 1
Används för ”Tectyl® ”- borttagning. Främst för utomhusbruk. Används främst på släta ytor som är täckt av tjocka lager tectylklotter.
-
AGS 27 TUNN
Används för tectylborttagning både utom-och inomhus. Används främst på släta ytor. Är lätt biologiskt nedbrytbar.