25 liter
Showing all 26 results
-
BPS 7718
BPS 7718 is a highly concentrated water carried impregnating agent for protecting brick, sandstone, light concrete and other porous mineral surfaces.
BPS 7718 is water repellent and gives a protection against water penetrating the surface. More or less invisible on the surface, and also UV-resistant.
BPS 7718 is permeable i.e stops water from penetrating, but the surface “can breathe” and transport moisture. Protects the surface up to 20 years.
A surface protected with BPS 7718 may be graffiti protected with AGS 3502 and AGS 3512. -
BPS 7726
BPS 7726 is a silane based facade protection for use on concrete and reinforced concrete. Consists of “small molecules” contributing to a deep penetration. BPS 7726 prevents the surface against water and salt ingress. Is permeable, i.e. water cannot penetrate, but the surface “can breathe” and release moisture. BPS 7726 is approved according to EN 1504-2, alone and in combination with AGS 3502 graffiti protective coating.
-
BPS 7712
BPS 7712 is a water carried impregnating agent for protecting mineral surfaces and concrete. BPS 7712 is water repellent and gives a protection against water penetrating the surface. More or less invisible on the surface, and also UV-resistant. BPS 7712 is permeable i.e stops water from penetrating, but the surface “can breathe” and transport moisture. Protects the surface for 10 years. A surface protected with BPS 7712 may be graffiti protected with AGS 3502 and AGS 3512.
-
BPS 7621 GEL
BPS 7621 GEL is a environmentally friendly paint remover, especially adopted to lift plastic paints and its primer. BPS 7621 GEL is mostly used when tin roofs are renovated and repainted.
BPS 7621 GEL has an extremely good adhesion on surfaces, making it possible to increase the dwelling time. User friendly. -
BPS 7425
BPS 7425 is a special formula developed to remove oil or oil spillage on different type of facade surfaces. BPS 7425 can be used on all types of stone and mineral surfaces. Protective covers on windows are not required. BPS 7425 is easily biodegradeable and user friendly.
-
BPS 7410
BPS 7410 is a very efficient facade cleaner. Removes greasy, oily deposits, soot and other dirty particles. May be used on all types of stone and mineral surface material. There is no need of covering windows. Especially suitable to use on metal surfaces. BPS 7410 is readily biodegradable and safe to use.
-
BPS 7320
BPS 7320 contains a unique blend of surfactants and acids. Used for cleaning of aluminium. Does not affect the sewage system. Especially suitable for removal of traffic pollutants and soot from aluminium. BPS 7320 must not be used on electrolytic treated surfaces. Biodegradable.
-
BPS 7319
BPS 7319 is a solvent based, biodegradable product developed to remove silicone coatings and residues. Mainly used outside. User friendly.
BPS 7319 can be used on most types of surfaces such as:
- Concrete
- Plastics
- Glass
- Metal
- Minerals
- Brick
- Wood
-
BPS 7317
BPS 7317 is an acidic cleaner used for cleaning of surfaces from excess mortar and construction dirt. For exterior use.
BPS 7317 may be used on surfaces as:- Unpolished Granite
- Unpolished Sandstone
- Concrete
- Unpolished Slate
- Cut stone
- Brick
- Terracotta
- Stucco
- Basaltic rock
-
BPS 7315
BPS 7315 is an acidic product, used for neutralising facades which have been cleaned with highly alkaline products.
BPS 7315 can be used on: granite, sandstone, slate, concrete, alkali brick, cut stone, brick, terracotta, unpolished marble, basaltic rock.
Biodegradable. For exterior use. -
BPS 7300
BPS 7300 is an acidic facade cleaner used for cleaning of very dirty surfaces. Mainly used outside.
BPS 7300 can be used on surfaces such as:- Granite
- Brick
- Concrete
-
BPS 7150 GEL
BPS 7150 GEL is a highly alkaline paint stripper, removing oil based paints and is also an efficient remover for thick layers of paint. BPS 7150 GEL can be used on most surfaces. The exceptions are aluminium, copper, magnesium. Leather and textiles will be damaged. Biodegradable.
-
BPS 7100
BPS 7100 is a highly alkaline cleaner, used for cleaning of very dirty surfaces.
BPS 7100 can be used on surfaces as: plaster, limestone, concrete, alkaline bricks. Biodegradable. -
BPS 7102
BPS 7102 is an alkaline cleaner, used for cleaning of dirty surfaces. Mainly used outside. Dissolves soot, greasy residues. Biodegradable.
BPS 7102 can be used on most surfaces such as:- Plaster
- Limestone
- Concrete
- Alkaline bricks
- Wood
- Aluminium surfaces
- Granite
-
BPS 7111
BPS 7111 is used for removal of algae, mould, lichen or other fouling from most surfaces such as: brick, concrete, plaster, granite, lime and sandstone, roofing tiles and wood. Safe to use and gives no negative impact on building materials. BPS 7111 offers up to 10 years protection against algae or other fouling. Biodegradable.
NB! Hard surfaces with no porosity can not be treated. If rainfall appears within 24 hours, the effectiveness of the treatment will be affected. Make sure to apply during dry conditions.
-
AGS 60
AGS 60 removes shadowing left in substrate following graffiti removal, in special cases also paint removal. AGS 60 is formulated for use on the following materials: granite, slate, sandstone, glazed brick, treated marble, wood and non-organic paint. Readily biodegradable according to OECD test 302 b. For use on exterior and interior surfaces. Primarily used on absorbent surfaces.
Note! Do not use AGS 60 on aluminium and copper. -
AGS 33+ GEL
AGS 33+ GEL is a thickened highly effective graffiti remover to be used on porous and some hard surfaces. Specially designed for use in cold weather conditions. AGS 33+ GEL dissolves spray-paint graffiti, permanent markers and even petroleum based rust protective sealers. AGS 33+ GEL may be used on following surfaces:
Porous surfaces:
Concrete, brick, granite, marble, limestone, sandstone, slate, surfaces painted with non-organic paint.
Hard surfaces:
Metal, treated wood, clinker, glazed brick and some plasters. -
AGS 560
AGS 560 is especially developed for removal of graffiti on plexiglass. Effectively removes marker felt-tip pen and rust protective coating without attacking the plexiglass. AGS 560 is also effective on other painted and delicate surfaces. AGS 560 even works on spray paint graffiti, but the dissolving time is a little bit longer. Testing on a small surface prior to removal is recommended. For outside and indoor use. Biodegradable.
-
AGS 3+ GEL
AGS 3+ GEL is a thickened highly effective graffiti remover to be used on both porous and hard surfaces. AGS 3+ GEL dissolves spray-paint graffiti, permanent markers and even petroleum based rust protective sealers. For use on exterior and interior surfaces. Readily biodegradable.
AGS 3+ GEL may be used on following surfaces:
Porous surfaces:
Concrete, brick, granite, marble, limestone, sandstone, slate, surfaces painted with non-organic paint.
Hard surfaces:
Metal, treated wood, clinker, glazed brick, glass. -
AGS 2+ GEL
AGS 2+ GEL is a powerful graffiti and paint remover. For use on exterior and interior surfaces. AGS 2+ GEL may be used on porous surfaces for all weather conditions. AGS 2+ GEL effectively dissolves spray paint graffiti and permanent markers. Readily biodegradable according to OECD test 302 B.
AGS 2+ GEL may be used on following surfaces:
Porous surfaces
Concrete, brick, granite, marble, limestone, sandstone, slate, surfaces painted with non-organic paint.Hard surfaces
Metal, treated wood, clinker, glazed brick, glass. -
AGS POWER BLUE LIQUID
AGS POWER BLUE LIQUID is a very powerful graffiti remover to be used on porous surfaces such as: granite, brick, concrete, lime, tiles, etc. AGS POWER BLUE LIQUID dissolves spray-paint graffiti, permanent markers and leather dye graffiti.
NB! Do not use AGS POWER BLUE LIQUID on metal surfaces as aluminium. Make a test before removal.
-
AGS 65
AGS 65 removes shadowing left in substrate following graffiti removal, in special cases also paint removal. AGS 65 is formulated for use on the following materials: granite, slate, sand-stone, glazed brick, treated marble, wood and non-organic paint. AGS 65 is slightly thickened to cling on surface and increase the dwelling time. Readily biodegradable. For use on exterior and interior surfaces. Primarily used on porous surfaces.
NOTE! AGS 65 must not be used on soft metal surfaces, aluminium, e.g.
-
AGS 25
AGS 25 is a readily biodegradable product used for removal of rust protective sealers. AGS 25 may be used on most surfaces: hard non porous surfaces, such as polished stone surfaces, plastic, metal, or porous surfaces such as concrete, brick, granite, plaster etc. For use on exterior and interior surfaces. On porous surfaces: Use AGS 25 in combination with AGS 27 GEL. Readily biodegradable.
-
AGS POWER BLUE GEL
AGS POWER BLUE GEL is a very powerful graffiti and shadow remover to be used in cold weather and on difficult graffiti. Can be used on porous surfaces such as: granite, brick, concrete, lime, tiles, etc. AGS POWER BLUE GEL dissolves spray-paint graffiti, permanent markers and leather dye graffiti. For use on porous exterior surfaces.
Note! Do not use AGS POWER BLUE GEL on metal surfaces as aluminium. Make a test before removal.
-
AGS TECTYLBORT 1
Används för ”Tectyl® ”- borttagning. Främst för utomhusbruk. Används främst på släta ytor som är täckt av tjocka lager tectylklotter.
-
AGS 27 TUNN
Används för tectylborttagning både utom-och inomhus. Används främst på släta ytor. Är lätt biologiskt nedbrytbar.