AGS 7

AGS 7 effectively removes shadowing from most types of permanent marker and leather dyes. May also remove spray paint shadows. Thickened for prolonged dwelling time. AGS 7 may be used on most porous surfaces that withstand a bleaching effect such as concrete, brick, marble, sandstone, limestone etc. Please be aware of that AGS 7 may affect metal surfaces. It is always recommended a test be made on a small part of the surface, especially on darker surfaces. For use on both interior and exterior, porous surfaces.

Download safety sheet

Download product sheet

SKU: 3631-005 Categories: ,

Description

Application instructions

Apply a thick layer of AGS 7 on the surface. To prevent drying out, cover with a plastic film. Suitable when long dwelling time is needed and on very absorbent surfaces. Dwelling time may vary from 4 hours to several days. Rinse with warm water and adjust the pressure to the surface. Repeat the process if there are any shadows left.

Note! DO NOT MIX WITH ACIDS. TOXIC GAS MAY BE FORMED.

Dosage
Use as concentrate.

Consumption
Approx. 1 litre/m².

Storage
Store frost-free in closed original container.

Shelf life
Approximately 3-6 months in unopened container.

Precautions
Use protective clothing, glasses and gloves.

Marking
Danger

Causes severe skin burns and eye damage.

Classified as dangerous goods according to ADR.
UN 1791, HYPOCHLORITE SOLUTION
Class: 8 PG: II
For more information, see MSDS.

Additional information

Amount

5 liter

Related products

  • AGS POWER BLUE GEL

    AGS POWER BLUE GEL is a very powerful graffiti and shadow remover to be used in cold weather and on difficult graffiti. Can be used on porous surfaces such as: granite, brick, concrete, lime, tiles, etc. AGS POWER BLUE GEL dissolves spray-paint graffiti, permanent markers and leather dye graffiti. For use on porous exterior surfaces.

    Note! Do not use AGS POWER BLUE GEL on metal surfaces as aluminium. Make a test before removal.

    Download safety sheet

    Download product sheet

  • AGS 25

    AGS 25 is a readily biodegradable product used for removal of rust protective sealers. AGS 25 may be used on most surfaces: hard non porous surfaces, such as polished stone surfaces, plastic, metal, or porous surfaces such as concrete, brick, granite, plaster etc. For use on exterior and interior surfaces. On porous surfaces: Use AGS 25 in combination with AGS 27 GEL. Readily biodegradable.

    Download safety sheet

    Download product sheet

  • AGS 5 SR HAWK

    AGS 5 SR HAWK effectively removes graffiti and shadowing from most types of permanent marker or felt-tip pens. Can also be used on spray-paint. AGS 5 SR HAWK may be used on most surfaces. Hard non-porous surfaces, such as painted substrates. AGS 5 SR HAWK has shown to be very effective to solve difficult leather dye pigments. For use on exterior and interior surfaces.

    Download safety sheet

  • AGS 3+ GEL

    AGS 3+ GEL is a thickened highly effective graffiti remover to be used on both porous and hard surfaces. AGS 3+ GEL dissolves spray-paint graffiti, permanent markers and even petroleum based rust protective sealers. For use on exterior and interior surfaces. Readily biodegradable.

    AGS 3+ GEL may be used on following surfaces:
    Porous surfaces:
    Concrete, brick, granite, marble, limestone, sandstone, slate, surfaces painted with non-organic paint.
    Hard surfaces:
    Metal, treated wood, clinker, glazed brick, glass.

    Download safety sheet

    Download product sheet