AGS 5 SR GEL

AGS 5 SR GEL är speciellt framtagen för borttagning av klotter och skuggbildning från ex. tusch- och anilinfärger på hårda ytor. Löser även effektivt sprayklotter på porösa ytor. Används både inom- och utomhus.

Ladda ner säkerhetsblad

Ladda ner produktblad

SKU: 3628-005 Category: Tag:

Description

SÅ HÄR GÖR DU

Klotterborttagning på hårda ytor:
Använd AGS 5 SR GEL vid svåra objekt. Applicera med en pensel. Låt verka, anpassa verkningstiden till underlaget. Torka rent med trasa. För att undvika kemrester på ytan neutralisera med vatten eller milt rengöringsmedel typ RENO 12 eller SPEEDY.

Klotterborttagning på porösa ytor:
Applicera AGS 5 SR GEL med borste, pensel eller airlesspruta. Låt verka tills klottret är upplöst, 15 minuter – 4 timmar, beroende på klottrets ålder, väderlek mm. Spola av med hetvattenhögtryck,90°C, 150 bar eller anpassa till ytans beskaffenhet. Munstyckets spridningsvinkel bör vara 15°-25° och flödet ca 20 liter/minut.
Om det blir ”skuggor” kvar, använd AGS 60 eller AGS 65. OBS! Vid osäkerhet: Gör alltid ett prov på en liten del av ytan.

Dosering
Används koncentrerat.

Åtgång
0,2-0,5 liter/m².

Förvaring
Förvaras frostfritt i slutet originalemballage.

Hållbarhet
Ca 24 månader i oöppnad förpackning.

Skyddsåtgärder
Använd skyddshandskar, skyddskläder, och skyddsglasögon.

Additional information

Förorening

Yta

, , , , , , , , , , , , , , ,

Related products

  • AGS 3500

    AGS 3500 is a water-carried all-weather long-term protection, formulated for most types of surfaces. Provides strong protection against spray paint, marker/felt-tip pens and mechanical damage. Protects against airborne pollution and moisture for a minimum of 5 years. Permeable and allows protected surface to breathe. Correctly applied, life expectancy against graffiti is approximately 5 years. Prevents graffiti from penetrating into substrate. A so called sacrificial coating, which means that surface must be re-protected, following graffiti removal. AGS 3500 is biodegradable.

    Download safety sheet

    Download product sheet

  • AGS 3506

    AGS 3506 is a pigmented water based all-weather long-term protection, formulated for most types of surfaces. AGS 3506 can be pigmented according to NCS and RAL standards. Formulated for most types of surfaces. Protects against graffiti from spray paint or marker/felt-tip pen. Protects against graffiti, airborne pollution and moisture for a minimum of 5 years. Permeable and allows protected surface to breathe. Prevents graffiti from penetrating into substrate. A so called sacrificial coating, which means that surface must be re-protected, following graffiti removal.
    AGS 3506 is readily biodegradable.

    Download safety sheet

    Download product sheet

  • AGS GRAFFITI WIPES

    AGS GRAFFITI WIPES contain a highly efficient graffiti remover absorbed into paper cloth. AGS GRAFFITI WIPES are used for most types of spray paint and marker-/felt-tip pen graffiti removal. For use on exterior and interior surfaces. AGS GRAFFITI WIPES are used on painted and other delicate surfaces. The solvent in the wipes is readily biodegradable and safe to use. Do not use AGS GRAFFITI WIPES on plexiglas. Use AGS PLEXI WIPES or AGS 560 instead.

    Download safety sheet

    Download product sheet

  • AGS 3514

    AGS 3514 is a water-carried all-weather long-term protection, formulated for most types of surfaces. Provides strong protection against spray paint, marker/felt-tip pens and mechanical damage. Protects against airborne pollution and moisture for a minimum of 5 years. Low melting point (60°C) and is suitable to apply on delicate surfaces such as: plaster, limestone, sandstone, etc. The low melting point makes the time spent on wash off significantly less. Permeable and allows protected surface to breathe. Correctly applied, life expectancy against graffiti is approximately 5 years. A so called sacrificial coating, which means that surface must be re-protected, following graffiti removal. Easily biodegradable.

    Download safety sheet

    Download product sheet