AGS HAWK WIPES

AGS HAWK WIPES contains a highly efficient graffiti remover absorbed into paper clothes. Efficiently removes spray paint and marker-/felt tip pen graffiti. AGS HAWK WIPES can be used on industrial painted and delicate surfaces. NOTE! Do not use AGS HAWK WIPES on Plexiglas. Use AGS PLEXI WIPES or AGS 560 instead. For use on exterior and interior surfaces. The solvent in the wipes is readily biodegradable and safe to use.

Download safety sheet

Download product sheet

SKU: 3998 Category: Tags: , ,

Description

Application instructions

Tear off a piece of paper cloth and wipe off the graffiti. In case of lot of graffiti: Try always to use clean side of the cloth to avoid smearing. After graffiti removal, rinse with water.
NB! AGS HAWK WIPES may be used on most surfaces, but to be sure that the surface will not damage, do a test on a small area.

Storage
Store frost-free in closed original container.

Shelf life
Approximately 24 months in unopened container.

Precautions
Use protective gloves. Use protective goggles when there is a risk of eye contact.

Marking
Warning

Harmful if swallowed. Causes skin irritation. Causes serious eye irritation.

Not classified as dangerous goods according to ADR.
For more information, see MSDS.

Additional information

Förpackningsstorlek

Related products

  • AGS 3506

    AGS 3506 is a pigmented water based all-weather long-term protection, formulated for most types of surfaces. AGS 3506 can be pigmented according to NCS and RAL standards. Formulated for most types of surfaces. Protects against graffiti from spray paint or marker/felt-tip pen. Protects against graffiti, airborne pollution and moisture for a minimum of 5 years. Permeable and allows protected surface to breathe. Prevents graffiti from penetrating into substrate. A so called sacrificial coating, which means that surface must be re-protected, following graffiti removal.
    AGS 3506 is readily biodegradable.

    Download safety sheet

    Download product sheet

  •

    AGS 1 is a powerful graffiti and paint remover. For use on exterior and interior surfaces. For use on hard, non-porous surfaces and painted surfaces. Readily biodegradable.

    Download safety sheet

    Download product sheet

  • AGS 60

    AGS 60 removes shadowing left in substrate following graffiti removal, in special cases also paint removal. AGS 60 is formulated for use on the following materials: granite, slate, sandstone, glazed brick, treated marble, wood and non-organic paint. Readily biodegradable according to OECD test 302 b. For use on exterior and interior surfaces. Primarily used on absorbent surfaces.
    Note! Do not use AGS 60 on aluminium and copper.

    Download safety sheet

    Download product sheet

  • Placeholder

    AGS 3550

    AGS 3550 is an outstanding 1-pack permanent protective coating. Contains of a polysilazane/nitrogen compound which gives a very hard bonding to the surface. Stops permanent markers and spray paint graffiti from penetrating the surface. AGS 3550 also withstands most of the leather dye graffiti in the market. AGS 3550 gives matt and dull surfaces a fresh and shiny lustre. AGS 3550 has an excellent durability and high UV resistance. Oxidation and corrosion resistance. High and low temperature resistance.
    AGS 3550 may be applied on most hard surfaces such as painted metal, (buses, trains, ticket machines, mail boxes), aluminium, galvanised steel and most plastics and Perspex. If uncertainty of adhesion, make a small test with a strong tape and rip off.

    Note! AGS 3550 shall NOT be applied on exterior porous surfaces.

    Download safety sheet

    Download product sheet