AGS 5 SR

AGS 5 SR is a specially developed graffiti remover for removal of shadowing from most types of permanent markers or felt-tip pen graffiti and leather dyes. Can also be used on spray-paint. AGS 5 SR may be used on most surfaces. Hard non-porous surfaces, such as painted substrates. Porous surfaces, such as concrete, brick, sandstone, limestone, etc. AGS 5 SR has shown to be very effective to solve difficult leather dye pigments. For use on exterior and interior surfaces.

Download safety sheet

Download product sheet

SKU: 3627 Category: Tag:

Description

Application instructions

Apply AGS 5 SR on to a dry, clean rag or an absorbent paper towel and wipe away the graffiti. Turn over the cloth so that only the clean part is used to the graffiti. Avoid wiping over dissolved graffiti. If there is a grease build up then wipe it off with clean rag. In order to stop the dissolution process, simply apply water on the surface already covered with the graffiti. If shadows remain use AGS 60 or AGS 65. It is always recommended to make a test on a small part of the surface.

Dosage
Use as concentrate.

Consumption
0,1-0,3 litre/m².

Storage
Store frost-free in closed original container.

Shelf life
Approximately 24 months in unopened container.

Precautions
Use protective clothing, glasses and gloves.

Marking
Warning

Harmful if swallowed. Causes skin irritation. Causes serious eye irritation.

Not classified as dangerous goods according to ADR.
For more information, see MSDS.

Additional information

Förpackningsstorlek

5 liter, 25 liter

Related products

  • AGS 5 SR HAWK

    AGS 5 SR HAWK effectively removes graffiti and shadowing from most types of permanent marker or felt-tip pens. Can also be used on spray-paint. AGS 5 SR HAWK may be used on most surfaces. Hard non-porous surfaces, such as painted substrates. AGS 5 SR HAWK has shown to be very effective to solve difficult leather dye pigments. For use on exterior and interior surfaces.

    Download safety sheet

  • AGS 10

    AGS 10 is a product used for the removal of pigment shadows left after graffiti removal. Always test AGS 10 on the material from which the shadows is to be removed to see that the surface is not affected negatively. Exercise particular caution when using AGS 10 on materials like marble and travertine. For use on exterior and interior surfaces. Primarily used on absorbent surfaces. Can be used when AGS 60 or AGS 65 is not quite strong enough. Biodegradable.

    Download safety sheet

    Download product sheet

  • AGS 3515

    AGS 3515 is a water-carried all-weather temporary graffiti protection, formulated for most types of absorbing surfaces. AGS 3515 is designed to be used as a 1 layer protection. Provides good protection against spray paint, marker/felt-tip pens and mechanical damage. Protects against airborne pollution and moisture. Low melting point (60°C) contributes to easy wash off. Permeable and allows protected surface to breathe. Easily biodegradable. A so called sacrificial coating, which means that surface must be re-protected, following graffiti removal. AGS 3515 is suitable on surfaces that are frequently vandalized with graffiti, for example pedestrian tunnels. On such surfaces, 1 thick layer is often enough. In these occasions, AGS 3515 works as a temporary protection with 1-2 years of durability.
    Note! When applying AGS 3515, a white ”milky” appearance is obtained. which after drying becomes transparent.

    Download safety sheet

    Download product sheet

  • AGS HAWK WIPES

    AGS HAWK WIPES contains a highly efficient graffiti remover absorbed into paper clothes. Efficiently removes spray paint and marker-/felt tip pen graffiti. AGS HAWK WIPES can be used on industrial painted and delicate surfaces. NOTE! Do not use AGS HAWK WIPES on Plexiglas. Use AGS PLEXI WIPES or AGS 560 instead. For use on exterior and interior surfaces. The solvent in the wipes is readily biodegradable and safe to use.

    Download safety sheet

    Download product sheet