AGS 5 SR HAWK GEL

AGS 5 SR HAWK GEL

AGS 5 SR HAWK GEL är speciellt framtagen för borttagning av klotter och skuggbildning från ex. tusch- och anilinfärger på hårda ytor. Löser även effektivt sprayklotter på porösa ytor. Används både inom- och utomhus.

Ladda ner säkerhetsblad

Ladda ner produktblad

Artikelnr: 36281 Kategori: Etikett:

Beskrivning

SÅ HÄR GÖR DU

Klotterborttagning på hårda ytor:
Använd AGS 5 SR HAWK GEL vid svåra objekt. Applicera med en pensel. Låt verka, anpassa verkningstiden till underlaget. Torka rent med trasa. För att undvika kemrester på ytan, neutralisera med vatten eller milt rengöringsmedel typ RENO 12 eller SPEEDY.

Klotterborttagning på porösa ytor:
Applicera AGS 5 SR HAWK GEL med borste, pensel eller airlesspruta. Låt verka tills klottret är upplöst, 15 minuter – 4 timmar, beroende på klottrets ålder, väderlek mm. Spola av med hetvattenhögtryck, 90°C, 150 bar eller anpassa till ytans beskaffenhet. Munstyckets spridningsvinkel bör vara 15°-25° och flödet ca 20 liter/minut.
Om det blir ”skuggor” kvar, använd AGS 60 eller AGS 65. OBS! Vid osäkerhet: Gör alltid ett prov på en liten del av ytan.

Åtgång
0,2-0,5 liter/m²

Dosering
Används koncentrerat.

Förvaring
Förvaras frostfritt i slutet originalemballage.

Hållbarhet
Ca 24 månader i oöppnad förpackning.

Skyddsåtgärder
Använd skyddshandskar, skyddskläder, och skyddsglasögon.

Ytterligare information

Förpackningsstorlek

5 liter, 25 liter
Förorening

Yta

, , , , , , , ,

Relaterade produkter

AGS 5 SR HAWK GEL

AGS 5 SR HAWK GEL

AGS 5 SR HAWK GEL a specially developed graffiti remover for removal of shadowing from most types of permanent markers or felt-tip pen graffiti and leather dyes. For use on exterior and interior surfaces. AGS 5 SR HAWK GEL may be used on most surfaces: hard non porous surfaces, such as painted substrates, porous surfaces, such as brick, concrete, sandstone, limestone etc.

Download safety sheet

Download product sheet

Artikelnr: 36281 Kategori: Etikett:

Beskrivning

Application instructions

Hard surfaces
Use AGS 5 SR HAWK GEL when the graffiti is difficult or need prolonged dwelling time. Apply with a brush, let work. Wipe off with a clean rag. To avoid chemicals on the surface, neutralise with water or a mild alkaline cleaner. It is always recommended to make a test on a small part of the surface.

Porous surfaces
Apply AGS 5 SR HAWK GEL with a brush or airless sprayer. Agitate the surface well. Leave until graffiti has dissolved, 20 minutes – 4 hours. When cold, the time increases. Jet off with hot water and high pressure, (90°C, 150 bar/2175 PSI). Lance nozzle spread should be 15 – 25 degrees and water flow should be 15 to 20 litres/minute, (4-5 gal/minute). If shadows remain use AGS 60 or AGS 65.

Dosage
Use as concentrate.

Consumption
0,2 – 0,5 litre/m².

Storage
Store frost-free in closed original container.

Shelf life
Approximately 24 months in unopened container.

Precautions
Use protective clothing, glasses and gloves.

Marking
Warning

Harmful if swallowed. Causes skin irritation. Causes serious eye irritation.

Not classified as dangerous goods according to ADR.
For more information, see MSDS.

Ytterligare information

Förpackningsstorlek

5 liter, 25 liter

Relaterade produkter

  • AGS 560 PLEXI CLEAN

    AGS 560 PLEXI CLEAN

    AGS 560 PLEXI CLEAN is especially developed for removal of graffiti on plexiglass. Effectively removes marker felt-tip pen, leather dye and rust protective coating without attacking the plexiglass. AGS 560 PLEXI CLEAN is also effective on other painted and delicate surfaces. AGS 560 PLEXI CLEAN even works on spray paint graffiti, but the dissolving time is a little bit longer.

    NB! Testing on a small surface prior to removal is recommended.

    Download safety sheet

    Download product sheet

  • AGS 3505

    AGS 3505

    AGS 3505 is used for removal of AGS 3500/AGS 3502/AGS 3503/AGS 3512 protective coatings and graffiti on delicate substrate. For use on exterior surfaces. For porous surfaces. Biodegradable.

    Download safety sheet

    Download product sheet

  • AGS 560

    AGS 560

    AGS 560 is especially developed for removal of graffiti on plexiglass. Effectively removes marker felt-tip pen and rust protective coating without attacking the plexiglass. AGS 560 is also effective on other painted and delicate surfaces. AGS 560 even works on spray paint graffiti, but the dissolving time is a little bit longer. Testing on a small surface prior to removal is recommended. For outside and indoor use. Biodegradable.

    Download safety sheet

    Download product sheet

  • AGS 3506

    AGS 3506

    AGS 3506 is a pigmented water based all-weather long-term protection, formulated for most types of surfaces. AGS 3506 can be pigmented according to NCS and RAL standards. Formulated for most types of surfaces. Protects against graffiti from spray paint or marker/felt-tip pen. Protects against graffiti, airborne pollution and moisture for a minimum of 5 years. Permeable and allows protected surface to breathe. Prevents graffiti from penetrating into substrate. A so called sacrificial coating, which means that surface must be re-protected, following graffiti removal.
    AGS 3506 is readily biodegradable.

    Download safety sheet

    Download product sheet