AGS 25

AGS 25

AGS 25 är en lätt biologiskt nedbrytbar tectylborttagare som kan användas på de flesta ytor som t.ex. hårda icke absorberande ytor som släta stenytor, plast, lackerad plåt, eller porösa ytor som betong tegel, puts, etc. Används med fördel i kombination med AGS 27 GEL på porösa ytor där tectylklotter trängt djupt in i ytan.

Ladda ner säkerhetsblad

Ladda ner produktblad

Artikelnr: 3657 Kategori: Etikett:

Beskrivning

SÅ HÄR GÖR DU

Släta ytor:
Ta bort ev. ströklotter med en trasa indränkt med AGS 25.

Porösa ytor:
Lägg på AGS 25 med lågtrycksspruta, låt suga in i ytan några minuter, applicera därefter AGS 27 GEL med pensel eller airless sprayer. Verkningstiden varierar beroende på väderlek, klottrets ålder och temperatur, (ca 1-24 timmar). Spola av med hetvattenhögtryck 70-90°C, tryck beroende på ytans karaktär, ca 50-200 bar. Upprepa behandlingen vid behov.

Dosering
Används koncentrerat.

Åtgång
Ca 0,5 liter/m².

Förvaring
Förvaras frostfritt i slutet originalemballage.

Hållbarhet
Ca 24 månader i oöppnad förpackning.

Skyddsåtgärder
Använd skyddshandskar och skyddsglasögon.

Ytterligare information

Förpackningsstorlek

,

Förorening

Yta

, , , , , , , , , ,

Relaterade produkter

AGS 25

AGS 25

AGS 25 is a readily biodegradable product used for removal of rust protective sealers. AGS 25 may be used on most surfaces: hard non porous surfaces, such as polished stone surfaces, plastic, metal, or porous surfaces such as concrete, brick, granite, plaster etc. For use on exterior and interior surfaces. On porous surfaces: Use AGS 25 in combination with AGS 27 GEL. Readily biodegradable.

Download safety sheet

Download product sheet

Artikelnr: 3657 Kategori: Etikett:

Beskrivning

Application instructions

Hard non porous surfaces:
When graffiti is spread over an extensive area, use a cloth with AGS 25. Neutralise with water.

Porous surfaces:
Apply AGS 25 with low-pressure spray, then apply AGS 27 GEL with a brush. Let dwell for 30 minutes – 5 hours, depending on weather conditions. Jet off with high-pressure hot water (70-90°C, approx. 150 bar, nozzle angle 15-25°, 20 litres/ min.). If required repeat the process. Note! When cold weather, all graffiti removers need more time to dissolve the graffiti. Likewise, more time is required for thick layers and when substrate is porous.

Dosage
Use as concentrate.

Consumption
0,5- 1,0 litre/m².

Storage
Store frost-free in closed original container.

Shelf life
Approximately 24 months in unopened container.

Precautions
Use normal protective clothing, gloves and safety glasses.

Ytterligare information

Förpackningsstorlek

,

Förorening

Relaterade produkter

  •

    AGS 1 is a powerful graffiti and paint remover. For use on exterior and interior surfaces. For use on hard, non-porous surfaces and painted surfaces. Readily biodegradable.

    Download safety sheet

    Download product sheet

  • AGS 221 GEL

    AGS 221 GEL

    AGS 221 GEL is used for graffiti and paint removal from smooth factory-made/painted surfaces, e.g trains, coaches & buses, cars and industrial buildings etc. Can also be used on porous substrates. AGS 221 GEL is readily biodegradable.

    Download safety sheet

    Download product sheet

    Download test reports

  • AGS 27 GEL

    AGS 27 GEL

    AGS 27 GEL is a readily biodegradable product used for removal of rust protective sealers. AGS 27 GEL may be used on most surfaces: hard non-porous surfaces, such as polished stone surfaces, plastic, metal, or porous surfaces such as concrete, brick, granite, plaster etc. For use on exterior and interior surfaces. On porous surfaces: Use AGS 27 GEL in combination with AGS 25. Readily biodegradable.

    Download safety sheet

    Download product sheet

  • AGS 10

    AGS 10

    AGS 10 is a product used for the removal of pigment shadows left after graffiti removal. Always test AGS 10 on the material from which the shadows is to be removed to see that the surface is not affected negatively. Exercise particular caution when using AGS 10 on materials like marble and travertine. For use on exterior and interior surfaces. Primarily used on absorbent surfaces. Can be used when AGS 60 or AGS 65 is not quite strong enough. Biodegradable.

    Download safety sheet

    Download product sheet